Ubiquiti Generation 2 Fiber PoE Data Transport for Outdoor PoE Devices – White


The FiberPoE connects remote PoE devices and provides data and power using fiber and DC cabling.

• The FiberPoE provides fiber connectivity to any PoE device so its easier to connect your network
• Featuring an outdoor weatherproof form factor with integrated strain relief management, you never have to worry about the elements again
• The FiberPoE allows separate power from standard Ethernet cables or standard terminal block / power cable support so its easier to navigate and set up
• Featuring a built-in high-current gas discharge tube for the DC terminal block and PoE port, the FiberPoE Generation 2 delivers enhanced surge protection
• Using fiber optic cable for data transport significantly reduces electrostatic discharge (ESD) failures and electromagnetic interference (EMI)
• Data integrity is easily sustained in runs beyond 100 meters
• An integrated strain relief system was thoughtfully designed to fit inside the FiberPoE Generation 2 cover for added protection and a cleaner installation

Category: Uncategorized
Brand: Ubiquiti

Overcome PoE limitations with the next-generation FiberPoE, model F-POE-G2. The FiberPoE Generation 2 is a low-cost solution for outdoor deployments that require long-distance runs to reach the PoE device. Deployments with the FiberPoE Gen 2 provide significant EMI and ESD protection over typical PoE installations. The FiberPoE Gen 2 also features a durable, weatherproof form factor and enhanced surge protection. PoE is ideal for indoor or short-run installations. However, for outdoor, long-distance installations, PoE becomes vulnerable to EMI and is limited to 100 meters with correlated power loss. With the FiberPoE Generation 2, data and power are transported on separate cables to greatly improve data integrity and enable much longer cable runs. The FiberPoE Generation 2 provides Gigabit bi-directional data transport between twisted-pair ethernet cable and fiber optic cable, and injects DC power to the ethernet cable for passive PoE. Use one FiberPoE Generation 2 device as an Fiber-to-Ethernet Converter, or a pair of FiberPoE Generation 2 devices to create a Fiber Bridge.

Featuring a built-in high-current Gas Discharge Tube (GDT) for the DC terminal block and PoE port, the FiberPoE Gen 2 delivers enhanced surge protection. The added GDT support effectively protects against lightning and other power surges.

The FiberPoE Gen 2 supports a 1G SFP module and 24V or 50V power from a DC power cable or PoE cable.

Tech specs
• Enclosure: White Polycarbonate
• Interface Connections: (1) 1 Gbps SFP Port, (1) DC Terminal Block, (1) DC RJ45 Port DC Injection, (1) 1000 Mbps Ethernet PoE Port
• Typical Power Consumption: 1.5W
• Power Method: DC Terminal Block, 2-Wire, 24VDC or 50VDC, DC In RJ45 Port, 2-Pair (4, 5+; 7, 😎 (24VDC Input), or 4-Pair (24VDC or 50VDC Input) Passthrough, PoE RJ45 Port, 2-Pair (4, 5+; 7, 😎 (24VDC Input), or 4-Pair (24VDC or 50VDC Input) PoE Passthrough
• PoE Output: PoE RJ45 Port, 2-Pair (4, 5+; 7, 😎 (24VDC), or 4-Pair (24VDC or 50VDC) PoE
• DC Output: Terminal Block, 2-Wire (24VDC or 50VDC)
• Input DC Voltage: 16 to 57V
• Surge Protection: Built-In High-Current Gas Discharge Tube for DC Terminal Block and PoE Port
• Operating Temperature: -40°C to 60°C (may be further restricted by the operating temperature range of the SFP module being used)
• Operating Humidity: 10 to 95% Noncondensing
• ESD/EMP Protection: +/-24kV Contact / Air for Ethernet

Box Contents
• 1 x FiberPoE Generation 2
• 1 x Self Tapping Screw
• 2 x Metal Straps

Weight: 12 lbs
Dimensions: 12 × 12 × 12 in